最简单快捷的版本编译cubieboard固件

matson

有些组装的显示器很奇怪，不会自动检测是否有高清信号，需要把显示器关了再开就好了。你试一下

huangnh168

android编译完了，u-boot和kernel呢，怎么编译，谁能解释下

freechinaren

请问该版本需要编译的Linux内核是2.6.36版本，还是3.XX版本？

freechinaren

如果是Linux 3.xx,请大虾提供下载地址和编译方法，拜托了。

matson

huangnh168 发表于 2013-4-21 17:25
android编译完了，u-boot和kernel呢，怎么编译，谁能解释下

android编译和linux编译是集成在一起的。如果你是需要修改内核config，可以这样：
$cd kernel/common/allwinner
$cp arch/arm/configs/cubieboard_defconfig .config
$make ARCH=arm menuconfig
进入ncurses图形界面，并裁剪
完成后
$cp .config arch/arm/configs/cubieboard_defconfig
$make mrproper

然后在回到源码的最上层目录，重新编译，比如make -j3

freechinaren

  CC      net/xfrm/xfrm_sysctl.o
  CC      fs/binfmt_misc.o
  CC      net/xfrm/xfrm_replay.o
  CC      fs/binfmt_script.o
  CC      fs/binfmt_elf.o
  CC      fs/mbcache.o
target thumb C++: libRS <= frameworks/base/libs/rs/driver/rsdMeshObj.cpp
target thumb C++: libRS <= frameworks/base/libs/rs/driver/rsdProgram.cpp
  CC      net/xfrm/xfrm_user.o
  CC      net/xfrm/xfrm_ipcomp.o
target thumb C++: libRS <= frameworks/base/libs/rs/driver/rsdProgramRaster.cpp
  CC      fs/posix_acl.o
target thumb C++: libRS <= frameworks/base/libs/rs/driver/rsdProgramStore.cpp
  CC      fs/xattr_acl.o
target thumb C++: libRS <= frameworks/base/libs/rs/driver/rsdRuntimeMath.cpp
target thumb C++: libRS <= frameworks/base/libs/rs/driver/rsdRuntimeStubs.cpp
  CC      fs/generic_acl.o
target thumb C++: libRS <= frameworks/base/libs/rs/driver/rsdSampler.cpp
  LD      fs/built-in.o
target thumb C++: libRS <= frameworks/base/libs/rs/driver/rsdShader.cpp
target thumb C++: libRS <= frameworks/base/libs/rs/driver/rsdShaderCache.cpp
target thumb C++: libRS <= frameworks/base/libs/rs/driver/rsdVertexArray.cpp
target thumb C++: libRS <= out/target/product/cubieboard/obj/SHARED_LIBRARIES/libRS_intermediates/rsgApi.cpp
  LD      net/xfrm/built-in.o
target thumb C++: libRS <= out/target/product/cubieboard/obj/SHARED_LIBRARIES/libRS_intermediates/rsgApiReplay.cpp
  LD      net/built-in.o
host C++: a3dconvert <= development/tools/a3dconvert/a3dconvert.cpp
host C++: a3dconvert <= development/tools/a3dconvert/ObjLoader.cpp
In file included from development/tools/a3dconvert/ColladaLoader.h:28:0,
                 from development/tools/a3dconvert/a3dconvert.cpp:20:
development/tools/a3dconvert/GeometryLoader.h:31:8: 警告： #endif 指示的末尾有多余的标识符 [默认启用]
In file included from development/tools/a3dconvert/ObjLoader.h:25:0,
                 from development/tools/a3dconvert/ObjLoader.cpp:17:
development/tools/a3dconvert/GeometryLoader.h:31:8: 警告： #endif 指示的末尾有多余的标识符 [默认启用]
host C++: a3dconvert <= development/tools/a3dconvert/ColladaConditioner.cpp
development/tools/a3dconvert/a3dconvert.cpp:58:1: 警告： 成员‘android::renderscript::RsdHalFunctions::<anonymous struct>::destroy’缺少初始值设定 [-Wmissing-field-initializers]
make[1]: *** [sub-make] 错误 2
make[1]:正在离开目录 `/home/duan/work/cubieboard-tv-sdk/kernel/allwinner/common'
make: *** [TARGET_

freechinaren

参考版主的要求，重新配置Linux配置，添加USB摄像头和CSI，然后编译出现上面的错误信息，请怎样解决！谢谢

freechinaren

LD      lib/built-in.o
  CC      net/core/dst.o
  CC      drivers/media/video/sun4i_csi/device/gc0308.o
  LD      drivers/mfd/built-in.o
  LD      drivers/misc/carma/built-in.o
  LD      drivers/misc/cb710/built-in.o
  LD      drivers/misc/eeprom/built-in.o
  LD      drivers/misc/lis3lv02d/built-in.o
  LD      drivers/misc/ti-st/built-in.o
  CC      drivers/misc/sun4i-vibrator.o
  CC      net/core/netevent.o
  CC      drivers/media/video/sun4i_csi/device/gc0307.o
  CC      drivers/misc/sun4i-gpio.o
  CC      fs/nfs/nfs2xdr.o
  CC      net/core/neighbour.o
/home/duan/work/cubieboard-tv-sdk/kernel/allwinner/common/drivers/misc/sun4i-gpio.c: In function 'sun4i_gpio_init':
/home/duan/work/cubieboard-tv-sdk/kernel/allwinner/common/drivers/misc/sun4i-gpio.c:248: warning: ignoring return value of 'sysfs_create_group', declared with attribute warn_unused_result
  LD      drivers/misc/built-in.o
  CC      fs/nfs/direct.o
  LD      drivers/media/video/sun4i_csi/device/built-in.o
drivers/media/video/sun4i_csi/device/gc0308.o.data+0x394): multiple definition of `ccm_info_con'
drivers/media/video/sun4i_csi/device/ov7670.o.data+0x2d4): first defined here
drivers/media/video/sun4i_csi/device/gc0307.o.data+0x438): multiple definition of `ccm_info_con'
drivers/media/video/sun4i_csi/device/ov7670.o.data+0x2d4): first defined here
make[6]: *** [drivers/media/video/sun4i_csi/device/built-in.o] 错误 1
make[5]: *** [drivers/media/video/sun4i_csi/device] 错误 2
make[4]: *** [drivers/media/video] 错误 2
make[3]: *** [drivers/media] 错误 2
make[2]: *** [drivers] 错误 2
make[2]: *** 正在等待未完成的任务....
  CC      fs/nfs/pagelist.o
  LD      fs/nfs_common/built-in.o
  CC      fs/nls/nls_base.o
  CC      fs/nls/nls_cp437.o

freechinaren

本人是加了sun4i_csi摄像模块CSI0和CSI1就出现了上面的现象,请高手指点在此不胜感激！

happyrabbit

mark，学习