自己公司畫了塊板子，資料用的全志的，系統刷了，悲傷了

醉月

首先說說這個刷進去的img，在CB2上和另外一塊採用A20爲內核的板子上跑起來了，一切正常。但是在我這一批板子上，不能啓動，接上電視的時候，出現一個什麼啓動界面，亂七八糟的;有一塊板子啓動起來了，但是USB不能用，只有燒寫用的那個otg能用。
描述完了，下面是我串口啓動的時候，打印出來的信息。

一：這個是我刷的一個ubuntu系統，是網上別人做的img，但是在這裏USB沒法使用。

二： 用的android的打印信息。


這個怎麼限制帖子的字數啊，我就只能以附件發了，悲劇

醉月

HELLO! BOOT0 is starting!
boot0 version : 2.0.0                      read dram para.
dram driver version: 1.15
dram size =1024MB
0xffffffff
super_standby_flag = 0
Succeed in opening nand flash.
block from 2 to 6
deal block 2
Succeed in reading Boot1 file head.
The size of Boot1 is 0x00068000.
The file stored in 0x00000000 of block 2 is perfect.
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[       0.146] boot1 version : 2.0.0
[       0.155] script installed early ok
[       0.155] pmu type = 3
[       0.157] bat vol = 0 mv
[       0.173] axi:ahb:apb=4:2:2
[       0.173] set dcdc2=1400mv, clock=912M successed
[       0.175] key
[       8.387] LRADC key timeout without power key
[       8.387] flash init start
[       8.388] NB1 : enter NFB_Init
[       8.392] NB1 : enter phy init
[       8.395] [NAND] nand driver(b) version: 0x0x00000002, 0x0x00000012, data: 0x20130325
[       8.405] get the good blk ratio from hwscan : 912
[       8.408] NB1 : nand phy init ok
[      10.065] _RepairLogBlkTbl start
[      10.068] Log Block Index 0x00000000, LogicBlockNum: 0x00000014, LogBlockType: 0x00000000
[      10.072] log0: 0x00000337, Log1: 0x0000ffff, WriteIndex: 0x00000000
[      10.078] datablock: 0x0000033a, lastusedpage: 0x0000001e
[      10.087] Log Block Index 0x00000001, LogicBlockNum: 0x00000017, LogBlockType: 0x00000000
[      10.092] log0: 0x00000336, Log1: 0x0000ffff, WriteIndex: 0x00000000
[      10.099] datablock: 0x0000033b, lastusedpage: 0x00000052
[      10.108] Log Block Index 0x00000002, LogicBlockNum: 0x0000001b, LogBlockType: 0x00000000
[      10.113] log0: 0x00000334, Log1: 0x0000ffff, WriteIndex: 0x00000000
[      10.120] datablock: 0x0000034c, lastusedpage: 0x00000013
[      10.128] Log Block Index 0x00000003, LogicBlockNum: 0x00000054, LogBlockType: 0x00000000
[      10.134] log0: 0x000003fd, Log1: 0x0000ffff, WriteIndex: 0x00000000
[      10.140] datablock: 0x0000032f, lastusedpage: 0x0000001b
[      10.146] _RepairLogBlkTbl end
[      10.201] NB1 : init ok
[      10.201] flash init finish
[      10.225] fs init ok
[      10.226] fattype FAT16
[      10.227] fs mount ok
[      10.231] nand good_block_ratio=912
[      10.232] storage_type=0
[      10.276] 0
[      10.313] can't find c:\drv_hdmi.drv
[      10.313] ERR: wBoot_driver_install display driver failed
[      10.316] key value = 6
[      10.319] recovery key high 40, low 4
[      10.323] key found, android recovery
[      10.328] show pic finish
[      10.330] load kernel start
[      10.358] load kernel successed
[      10.358] start address = 0x4a000000
[      10.946] ERR: display driver n

U-Boot 2011.09-rc1-00002-g0336fb1-dirty (Apr 18 2013 - 14:10:42) Allwinner Technology

CPU:   SUNXI Family
Board: SUN7I-EVB
DRAM:  1 GiB
NAND:  [NAND] set nand_good_block_ratio 912
3648 MiB
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:5-
-name-        -start-       -size-      
bootloader  : 8000          10000      
env         : 18000         8000        
boot        : 20000         8000        
rootfs      : 28000         400000      
UDISK       : 428000        2f8000      
-----------------------------------
no misc partition is found
Hit any key to stop autoboot:  0

Starting kernel ...

aw_clkevt_init: sun7i_timer0_clockevent mult 6442450, max_delta_ns 170000, min_delta_ns 1000, cpumask 0xc0458848, irq 54
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.660823] aw_pm_init: not support super standby.
used uart info.: 0x01
[    0.961748] ctp_fetch_sysconfig_para: ctp_unused.
[    0.994839] create_regulator: axp20_ldo2: Failed to create debugfs directory
[    1.003099] create_regulator: axp20_buck2: Failed to create debugfs directory
[    1.010746] create_regulator: axp20_buck3: Failed to create debugfs directory
[    1.045979] [LCD] lcd_module_init
[    1.154260] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
[    1.162359] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
[    1.170443] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
[    1.178429] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
[    1.186432] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
[    1.194425] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
[    2.353034] init: ureadahead main process (675) terminated with status 5

Last login: Sat Jan  1 00:13:59 UTC 2000 on tty1
Welcome to Linaro 13.04 (GNU/Linux 3.3.0+ armv7l)
root@cubieboard2-desktop:~#

醉月

HELLO! BOOT0 is starting!
boot0 version : 2.0.0
?
read dram para.
dram driver version: 1.15
dram size =1024MB
0xffffffff
super_standby_flag = 0
Succeed in opening nand flash.
block from 2 to 6
deal block 2
Succeed in reading Boot1 file head.
The size of Boot1 is 0x00068000.
The file stored in 0x00000000 of block 2 is perfect.
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[       0.150] boot1 version : 2.0.0
[       0.159] script installed early ok
[       0.160] pmu type = 3
[       0.161] bat vol = 0 mv
[       0.178] axi:ahb:apb=4:2:2
[       0.178] set dcdc2=1400mv, clock=912M successed
[       0.180] key
[       8.393] LRADC key timeout without power key
[       8.393] flash init start
[       8.394] NB1 : enter NFB_Init
[       8.398] NB1 : enter phy init
[       8.401] [NAND] nand driver(b) version: 0x0x00000002, 0x0x00000012, data: 0x20130325
[       8.411] get the good blk ratio from hwscan : 912
[       8.414] NB1 : nand phy init ok
[       8.497] NB1 : init ok
[       8.497] flash init finish
[       8.523] fs init ok
[       8.525] fattype FAT16
[       8.525] fs mount ok
[       8.530] nand good_block_ratio=912
[       8.530] storage_type=0
[       8.577] 0
[       8.800] WRN232(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.output_type fail
[       8.805] WRN268(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.output_mode fail
[       8.815] WRN288(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.auto_hpd fail
[       8.825] lcd0_para.lcd_used=1
[       8.828] 0
[       9.031] 1
[       9.232] 2
[       9.433] 3
[       9.634] 4
[       9.835] 5
[      10.036] tv detect, ret = 0
[      10.036] no device plug
[      10.036] key value = 14
[      10.039] recovery key high 6, low 4
[      10.143] show pic finish
[      10.143] load kernel start
[      10.170] load kernel successed
[      10.170] start address = 0x4a000000
[      10.800] jump to


U-Boot 2011.09-rc1 (Jun 28 2013 - 18:11:51) Allwinner Technology

CPU:   SUNXI Family
Board: SUN7I-EVB
DRAM:  1 GiB
NAND:  [NAND] set nand_good_block_ratio 912
3648 MiB
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:11-
-name-        -start-       -size-      
bootloader  : 8000          8000        
env         : 10000         8000        
boot        : 18000         8000        
system      : 20000         100000      
data        : 120000        200000      
misc        : 320000        8000        
recovery    : 328000        10000      
cache       : 338000        a0000      
private     : 3d8000        8000        
databk      : 3e0000        80000      
UDISK       : 460000        2c0000      
-----------------------------------
bootcmd set setargs_nand
Hit any key to stop autoboot:  1  0

Starting kernel ...

[    0.725287] sw_ahci sw_ahci.0: SATA power enable do not exist!!
[    1.023071] rtc_hw_init(416) err: set clksrc to external losc failed! rtc time will be wrong
[    1.032804] sunxi_rtc_gettime(34): err, losc_err_flag is 1
[    1.072901] [+++BLUESLEEP+++]bluesleep_probe: bluesleep_probe line 639
[    1.072911]
[    1.081894] [gpio-err] __pio_to_irq: invalid pio to irq
[    1.127475] sunxi_rtc_gettime(34): err, losc_err_flag is 1
[    1.133644] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
[    1.777179] init: to sleep 1 seconds.
[    2.781359] init: has waken up.
[    2.784970] init: [william] hdmistatus = 0!
[    2.789656] init: [william] tvstatus = 0!
[    2.794771] init: width = 1280
[    2.798191] init: height = 720
[    2.801609] init: s.st_size = 3686400
[    3.558942] EXT4-fs (nande): VFS: Can't find ext4 filesystem
[    3.622055] init: buffer : /dev/block/nande[DBUG] LogBlkTye mismatch: 0x0, 0x1
[   11.943384] init: do_umount: /data
[   11.947314] init: do_umount error = Invalid argument
[   12.105677] EXT4-fs (nandh): VFS: Can't find ext4 filesystem
[   12.152030] init: buffer : /dev/block/nandh
[   16.715654] init: do_umount: /cache
[   16.719678] init: do_umoudnt error = Invalid argument
[   16.767567] init: start format /dev/block/UDISK
[   16.772941] init: wait for format /dev/block/UDISK
[   16.773148] init: fork to format /dev/block/UDISK
[   18.243108] init: format /dev/block/UDISK ok
[   18.249353] init: dont need format /dev/block/private
[   18.259434] EXT4-fs (nandj): VFS: Can't find ext4 filesystem
[   18.302001] init: buffer : /dev/block/nandj
[   20.653270] init: do_umount: /databk
[   20.657406] init: do_umount error = Invalid argument
[   20.714035] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[   21.532307] android_usb: already disabled
[   21.537957] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[   21.550631] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead

lin

{:soso_e127:}{:soso_e127:}{:soso_e127:}{:soso_e127:}

醉月

lin 发表于 2013-12-25 21:18

给点意见啊   哥们

lin

这个太高级了，搞不懂。看log很难看出硬件上的问题，请节哀。。。。{:soso_e153:}

lknlfy

自己画板？？

醉月

lknlfy 发表于 2013-12-28 17:42
自己画板？？

嗯，自己画的，不过，最后发现USB的TX  RX线反了，还有一些地方是手工焊接的，有问题

lknlfy

醉月 发表于 2013-12-28 21:58
嗯，自己画的，不过，最后发现USB的TX  RX线反了，还有一些地方是手工焊接的，有问题 ...

厉害，CPU咋焊？？

lknlfy

LZ有没CB2机械尺寸之类的资料？