本帖最后由 ghw 于 2013-2-27 22:17 编辑
上dmesg信息，娃哈哈，同时FreeBSD on Cubieboard：247977789 欢迎大家加入（初创，没几个人）
Wed Feb 27 11:52:10 UTC 2013
FreeBSD/arm (7axu.com) (ttyu0)
login: root
Feb 27 11:52:18 7axu login: ROOT LOGIN (root) ON ttyu0
FreeBSD 10.0-CURRENT (CUBIEBOARD) #0 r247397M: Wed Feb 27 21:23:20 CST 2013
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o Security advisories and updated errata information for all releases are
at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
for your release first as it's updated frequently.
o The Handbook and FAQ documents are at http://www.FreeBSD.org/ and,
along with the mailing lists, can be searched by going to
http://www.FreeBSD.org/search/. If the doc package has been installed
(or fetched via pkg install lang-freebsd-doc, where lang is the
2-letter language code, e.g. en), they are also available formatted
in /usr/local/share/doc/freebsd.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list. If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page. If you are not familiar with manual pages, type `man man'.
Edit /etc/motd to change this login announcement.
root@7axu:~ # dmesg -a
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #0 r247397M: Wed Feb 27 21:23:20 CST 2013
root@7axu.com:/usr/obj/arm.arm/home/freebsd-head/sys/CUBIEBOARD arm
gcc version 4.2.1 20070831 patched [FreeBSD]
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Cortex A8-r3 rev 2 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB disabled EABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:1
Cache level 1:
32KB/64B 4-way data cache WT WB Read-Alloc
32KB/64B 4-way instruction cache Read-Alloc
Cache level 2:
256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
real memory = 536870912 (512 MB)
avail memory = 517455872 (493 MB)
simplebus0: <Flattened device tree simple bus> on fdtbus0
aintc0: <A10 AINTC Interrupt Controller> mem 0xe1c20400-0xe1c207ff on simplebus0
a10_ccm0: <Allwinner Clock Control Module> mem 0xe1c20000-0xe1c203ff on simplebus0
a10_timer0: <Allwinner A10 timer> mem 0xe1c20c00-0xe1c20c8f irq 22 on simplebus0
Event timer "a10_timer Eventtimer" frequency 24000000 Hz quality 1000
Timecounter "a10_timer timer0" frequency 24000000 Hz quality 1000
a10wd0: <Allwinner A10 Watchdog> mem 0xe1c20c90-0xe1c20c97 on simplebus0
gpio0: <Allwinner GPIO controller> mem 0xe1c20800-0xe1c20bff irq 28 on simplebus0
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
ehci0: <Allwinner Integrated USB 2.0 controller> mem 0xe1c14000-0xe1c14fff irq 39 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci1: <Allwinner Integrated USB 2.0 controller> mem 0xe1c1c000-0xe1c1cfff irq 40 on simplebus0
usbus1: EHCI version 1.0
usbus1 on ehci1
uart0: <16750 or compatible> mem 0xe1c28000-0xe1c283ff irq 1 on simplebus0
uart0: console (115200,n,8,1)
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
WARNING: WITNESS option enabled, expect reduced performance.
Root mount waiting for: usbus1 usbus0
ugen0.1: <Allwinner> at usbus0
uhub0: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Allwinner> at usbus1
uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
Root mount waiting for: usbus1
Root mount waiting for: usbus1
ugen1.2: <PNY> at usbus1
umass0: <PNY Lovely Attache, class 0/0, rev 2.00/11.00, addr 2> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <PNY Lovely Attache 1100> Removable Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 7722MB (15814656 512 byte sectors: 255H 63S/T 984C)
Trying to mount root from ufs:/dev/da0s2 []...
mountroot: waiting for device /dev/da0s2 ...
warning: no time-of-day clock registered, system time will not be set accurately
Setting hostuuid: 2edf348f-8024-11e2-818d-bd7a2079c4c8.
Setting hostid: 0x1712017c.
No suitable dump device was found.
Entropy harvesting: interrupts ethernet point_to_point kickstart.
Starting file system checks:
/dev/da0s2: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da0s2: clean, 438360 free (1048 frags, 54664 blocks, 0.2% fragmentation)
Mounting local file systems:.
Writing entropy file:.
Setting hostname: 7axu.com.
Starting Network: lo0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Starting devd.
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
Creating and/or trimming log files.
Starting syslogd.
realpath: /dev/dumpdev: No such file or directory
/etc/rc: WARNING: Dump device does not exist. Savecore not run.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Clearing /tmp (X related).
Updating motd:.
Generating public/private rsa1 key pair.
Your identification has been saved in /etc/ssh/ssh_host_key.
Your public key has been saved in /etc/ssh/ssh_host_key.pub.
The key fingerprint is:
0a:c5:5a:64:48:78:28:77:6b:7c:72:eb:ce:f5:fe:cd root@7axu.com
The key's randomart image is:
+--[RSA1 1024]----+
| +..o |
|. + ++ |
| o + .+ |
| =+o |
| .o+ .S |
| ... |
| .. . |
| ... . o |
| .o .o.. E |
+-----------------+
Generating public/private dsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_dsa_key.
Your public key has been saved in /etc/ssh/ssh_host_dsa_key.pub.
The key fingerprint is:
bd:60:65:16:7e:56:9e:ba:31:64:f8:c4:42:4f:bf:99 root@7axu.com
The key's randomart image is:
+--[ DSA 1024]----+
| o . . |
| o * + . |
| B O + |
| = O . + |
| S . = E |
| . . . + |
| . . |
| |
| |
+-----------------+
Generating public/private rsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_rsa_key.
Your public key has been saved in /etc/ssh/ssh_host_rsa_key.pub.
The key fingerprint is:
78:d8:82:b2:e7:65:69:ef:bb:ad:cc:c9:cd:b6:fd:a4 root@7axu.com
The key's randomart image is:
+--[ RSA 2048]----+
| |
| |
| |
| . + |
| . . + S |
| o + |
| . . = . |
| o + = =.. o |
| . .@==.E.. |
+-----------------+
Generating public/private ecdsa key pair.
Your identification has been saved in /etc/ssh/ssh_host_ecdsa_key.
Your public key has been saved in /etc/ssh/ssh_host_ecdsa_key.pub.
The key fingerprint is:
9c:bf:ff:cb:3b:f6:32:38:44:0f:06:9c:72:c4:ee:07 root@7axu.com
The key's randomart image is:
+--[ECDSA 256]---+
| +.. |
| . * |
| + . |
| . .E + |
| S. + o |
| .. o . |
| .o . |
| .o.= |
| ...+=B.|
+-----------------+
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.
Wed Feb 27 11:52:10 UTC 2013
Feb 27 11:52:18 7axu login: ROOT LOGIN (root) ON ttyu0 |
|Archiver|手机版|粤ICP备13051116号|cubie.cc---深刻的嵌入式技术讨论社区
发表于 2013-2-27 22:15:59
发表于 2013-6-9 21:38:31
楼主