建置 Android for Cubieboard2，無法開機
本帖最后由 sword 于 2016-3-19 16:23 编辑我下載了
http://dl.cubieboard.org/model/c ... 0_lichee.git.tar.gz
http://dl.cubieboard.org/model/c ... droid4.2.git.tar.gz
也依 http://docs.cubieboard.org/tutor ... r_own_android_image 步驟建置，也建置及 pack 成功!c:\bat
c:\magic.bin
find magic !!
RealLen=0x4B0C00
CPlugin Free lib
CPlugin Free lib
normal
dragon image.cfg sys_partition.fex
----------image is at----------
/home/sword/workspace/cb2/android/a20/lichee/tools/pack/sun7i_android_sugar-cubieboard2.img
pack finish但用 PhoenixCard.exe 寫入 Micro SD，放入 Cubieboard2 開機，螢幕閃了幾次就變黑屏了! 請問各位大大是否知道如何解決或方向?
謝謝!
你的板子是nand 还是tsd的？
先直接烧到板子上看看能不能起来，排除卡的问题
bill 发表于 2016-3-21 09:42 static/image/common/back.gif
你的板子是nand 还是tsd的？
謝謝您的回覆!
應該是 NAND!
我有試過燒官方的 Android Image 是可以開機的，也確認了 MicroSD 卡及燒錄的步驟應該沒問題!
蓝天-彭 发表于 2016-3-21 10:14 static/image/common/back.gif
先直接烧到板子上看看能不能起来，排除卡的问题
謝謝您的提醒!
這個沒試過! 今天下班回家再試試!!
sword 发表于 2016-3-21 10:30 static/image/common/back.gif
謝謝您的提醒!
這個沒試過! 今天下班回家再試試!!
剛燒錄了! 燒我建的 ROM 一樣無畫面，燒官方的 ROM 可成功...
sword 发表于 2016-3-21 22:41 static/image/common/back.gif
剛燒錄了! 燒我建的 ROM 一樣無畫面，燒官方的 ROM 可成功...
那接上串口线看看系统启动log，看看跑到哪里了
蓝天-彭 发表于 2016-3-23 09:40 static/image/common/back.gif
那接上串口线看看系统启动log，看看跑到哪里了
了解! 目前購買串口設備中...等有進一步結果，再回覆!!!
蓝天-彭 发表于 2016-3-23 09:40 static/image/common/back.gif
那接上串口线看看系统启动log，看看跑到哪里了
顯示如下訊息
HELLO! BOOT0 is starting!
boot0 version : 3.0.0
dram size =1024
card boot number = 0
card no is 0
sdcard 0 line count 0
: SD/MMC Card: 4bit, capacity: 30028MB
: vendor: Man 0x00275048 Snr 0x01da9202
: product: SD32G
: revision: 3.0
sdcard 0 init ok
The size of uboot is 0x000a4000.
sum=0x327d01a2
src_sum=0x327d01a2
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
[ 0.173]
U-Boot 2011.09-rc1-00003-ge89ab14-dirty (Jan 03 2014 - 12:57:33) Allwinner Technology
[ 0.182]version: 1.1.0
[ 0.185]pmbus: ready
[ 0.290]PMU: AXP209
[ 0.293]PMU: AXP20x found
[ 0.296]PMU: bat ratio = 100
[ 0.300]after set, dcdc2 =1450mv
[ 0.303]PMU: dcdc2 1450
[ 0.306]PMU: pll1 912 Mhz
boot_clock = 912
dcdc2_vol = 1450
[ 0.314]after set, dcdc2 =1450mv
dcdc3_vol = 1300
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
power_start = 1
storage_type = -1
usb_recovery = 1
find power_sply to end
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[ 0.350]DRAM:1 GiB
relocation Offset is: 35b23000
donn't initialize ther user_gpio (main_key:boot_init_gpio)
DRV_DISP_Init: opened
[ 0.563]boot_disp.output_type=3
[ 0.567]boot_disp.output_mode=5
[ 0.570]boot_disp.auto_hpd=1
workmode = 0
MMC: 0
SUNXI SD/MMC: 0
Man 275048 Snr 01da9202
SD32G
3.0
---------------MMC version 4.0---------------
---------------mmc->clock 50000000-----------
---------------mmc->bus_width 4--------------
boot0 capacity: 0KB,boot1 capacity: 0KB
[ 1.911]sunxi flash init ok
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:11-
-name- -start- -size-
bootloader: 1000000 2000000
env : 3000000 1000000
boot : 4000000 1000000
system : 5000000 20000000
recovery : 25000000 2000000
databk : 27000000 10000000
misc : 37000000 1000000
private : 38000000 1000000
data : 39000000 40000000
cache : 79000000 14000000
UDISK : 8d000000 0
-----------------------------------
base bootcmd=run setargs_mmc boot_normal
bootcmd set setargs_mmc
key 0
recovery key high 6, low 4
cant find fstbt value
to be run cmd=run setargs_mmc boot_normal
the user data'magic is bad
WORK_MODE_BOOT
sunxi_bmp_display
WORK_MODE_BOOT
[ 2.014]Hit any key to stop autoboot:0
read boot or recovery all
[ 2.552]sunxi flash read :offset 4000000, 12701248 bytes OK
[ 2.563]ready to boot
[ 2.565]
Starting kernel ...
aw_pm_init: not support super standby.
aw_pm_init: script_parser_fetch err.
notice: ir_wakeup = 0.
aw_pm_init: script_parser_fetch err.
notice: ir_addr_code = 0.
aw_pm_init: script_parser_fetch err.
notice: power_key = 87.
can't get item for emac_power gpio !
rtc_hw_init(416) err: set clksrc to external losc failed! rtc time will be wrong
sunxi_rtc_gettime(34): err, losc_err_flag is 1
##fb init:w=65536,h=65536,fbmode=0
hdmi module init
sunxi_rtc_gettime(34): err, losc_err_flag is 1
sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
init: reading config file
init: -----------没找到sata节点，nand启动--------------
init: FB_OPEN failed!
init: tvstatus = 0!
init: HDMI status = 0, try 40 times!TV status = 0
init: start e2fsck listening...
hdmi module init
init: do_umount: /data
init: do_umount: /cache
init: dont need format /dev/block/UDISK
init: dont need format /dev/block/private
init: do_umount: /databk
ir_init: ir_wakeup script_get_item error.
ir_init: power_key script_get_item error.
ir_init: ir_addr_code script_get_item error.
init: untracked pid 1212 exited
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
android_usb: already disabled
init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
init: C_IN_START
init: path = /dev/block/data
init: C_IN_START
init: path = /dev/block/cache
init: untracked pid 1350 exited
init: untracked pid 1583 exited
sunxi_rtc_gettime(34): err, losc_err_flag is 1
init: untracked pid 1763 exited
init: untracked pid 1769 exited
init: untracked pid 1798 exited
init: untracked pid 1804 exited
init: untracked pid 1833 exited
init: untracked pid 1839 exited
init: untracked pid 1868 exited
init: untracked pid 1874 exited
init: untracked pid 1903 exited
init: untracked pid 1909 exited
init: untracked pid 1938 exited
init: untracked pid 1944 exited
init: untracked pid 1973 exited
init: untracked pid 1979 exited
.....
页:
[1]